annot load driver. Error 1024. Protocol driver not found in Module.ini" When Con
annot load driver. Error 1024. Protocol driver not found in Module.ini" When Con annot load driver. Error 1024. Protocol driver not found in Module.ini" When Con
Citrix states in their article: CTX249401
CTX249401 - Error: "Cannot load driver. Error 1024. Protocol driver not found in Module.ini" When Connecting to an NFuse server with SecureICA
This document was published at: http://support.citrix.com/kb/entry.jspa?externalID=CTX249401
Document ID: CTX249401, Created on: Oct 24, 2000, Updated: Apr 23, 2003
Products: Citrix Secure Gateway 1.0
Program Neighborhood fails with Secure ICA.
When connecting to a Citrix NFuse server with SecureICA using the full Windows 32-bit Client, the connection fails with error 1024. To resolve this issue, modify the Module.ini file located in the %systemroot%profilesusernameapplication dataIca client directory.
1. Locate the Module.ini file on your client workstation.
2. Open Module.ini in a text editor such as Notepad.
3. Locate the section as defined in the example below.
4. Add the entries in red:
[EncryptionLevelAuth]
Basic = Encrypt
RC5 (40 bit) = EncRC5-40
RC5 (56 bit) = EncRC5-56
RC5 (128 bit) = EncRC5-128
Encrypt = Encrypt
EncRC5-40 = EncRC5-40
EncRC5-56 = EncRC5-56
EncRC5-128 = EncRC5-128
[EncryptionLevelSession]
Basic = Encrypt
RC5 (128 bit - Login Only) = EncRC5-0
RC5 (40 bit) = EncRC5-40
RC5 (56 bit) = EncRC5-56
RC5 (128 bit) = EncRC5-128
Encrypt = Encrypt
EncRC5-0 = EncRC5-0
EncRC5-40 = EncRC5-40
EncRC5-56 = EncRC5-56
EncRC5-128 = EncRC5-128
[Encryption Levels]
Basic = Encrypt
RC5 (40 bit) = EncRC5-40
RC5 (56 bit) = EncRC5-56
RC5 (128 bit) = EncRC5-128
Encrypt = Encrypt
EncRC5-40 = EncRC5-40
EncRC5-56 = EncRC5-56
EncRC5-128 = EncRC5-128
User login
Who's new
- Cachleferah
- Weedbacuupe
- vororourn
- vDonellaCandrah
- SnnaSusi