Printing from UIS to the IBM NC Parallel Port on WinFrame 1.xPrinting from UIS to the IBM NC Parallel Port on WinFrame 1.x Printing from UIS to the IBM NC Parallel Port on WinFrame 1.x
Citrix states in their article: CTX945558
CTX945558 - Printing from UIS to the IBM NC Parallel Port on WinFrame 1.x
This document was published at: http://support.citrix.com/kb/entry.jspa?externalID=CTX945558
Document ID: CTX945558, Created on: Jul 5, 2000, Updated: Apr 23, 2003
Products: Citrix WinFrame 1.8
Once the NC has booted, press the Pause/Break key to bring up the menu bar and select Setup, Change Setup Parameters. Scroll down to Parallel and in the Parallel Daemons Table, make sure Use Parallel Protocol is NOT selected; that is, the word "false" appears. Check that TCP Port is set to 5964.
Click Apply, then select Close from the File menu, and log out of any sessions that are running.
To make this change permanently when the NC boots, add the following line to STANDARD.NSM between the "set exec" and the "pref-environment" commands:
set parallel-daemons-table = { { 1 false 5964 } }
Setting up the UIS Server
Run Configuration Manager (in the UIS program group), expand the tree under Clients, then under X Servers, and then under Network Computing Devices Inc.
NOTE: The X vendor string of the IBM NC is Network Computing Devices Inc. and the version number is 10001.)
Click on the Network Computing Devices Inc. folder and then click on the Other tab on the dialog on the right hand side of Configuration Manager. Check that Printer port/command is set to 5964.
Now start a UIS session on the NC and on the client run Print Manager. Select Create Printerfrom the Printer menu and select the appropriate driver for your printer. Add a description and then select CLIENTLPT1: in Print to:. This automatically creates a printer name of #LPT1. Press OK and you should be ready to print.
Primary links
User login
Who's new
- maczugaher
- locksgydff
- isotheces
- ahundredyears7
- Jacomijntjefu
